{"title":"Home page","description":"","products":[{"product_id":"porsche-911-mini-blade-fuse-panel-upgrade-set","title":"Porsche 911 Mini Blade Fuse Panel Upgrade Set 74-89","description":"\u003cp\u003eHave you ever been driving along, hit a bump in the road and have the headlights drop out suddenly, or the windscreen wipers stop working in the pouring rain?  Are your fuse panel littered with patched in fuses and dodgy wiring; is it hard to trace intermittent electrical issues?  If so, then this kit is a must have for all classic Porsche 911 enthusiasts who want the most reliable alternative to the dated factory fuse system.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eFix those broken, melted, corroded fuse panels, and sort those years of electrical gremlins with this easy to install fuse panel. \u003cspan\u003eOur fuse panels are available to replace both the front and rear of the 911.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe Adapt Motorsport Advantage:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUses modern mini blade fuses, easily found at service stations and auto shops.\u003c\/li\u003e\n\u003cli\u003eFuseways rated at 25A\u003c\/li\u003e\n\u003cli\u003eLarger than factory terminals to quickly and easily swap wires, even with additional or larger wires, unlike other products\u003c\/li\u003e\n\u003cli\u003eSwitchable on board diagnostics, to quickly diagnose electrical faults.  Red LED for fuse blown, Green LED for output live, Green LED when fuse removed, and backfeed is present.  This is a really helpful diagnostics system for troubleshooting electrical gremlins.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFront Panel Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSimple installation, direct replacement, fitting to factory fuse panel mounting points.\u003c\/li\u003e\n\u003cli\u003eIn built 40A headlight relays, rated for high Inrush current of cold filament globes.  Stop the voltage drop of the aging factory wiring and switch contacts, and brighten those headlights.\u003c\/li\u003e\n\u003cli\u003eAdditional power supply terminal to permit external power supply for higher wattage globes.\u003c\/li\u003e\n\u003cli\u003eSpare fuseway for additional accessories, such as rally equipment, radios, additional lights.\u003c\/li\u003e\n\u003cli\u003eFits under factory fuse cover.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRear Panel Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSimple installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhats Included:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFuse Panel\u003c\/li\u003e\n\u003cli\u003eMini Blade Fuses, with spare fuses\u003c\/li\u003e\n\u003cli\u003eInsulating spacers\u003c\/li\u003e\n\u003cli\u003eMounting hardware\u003c\/li\u003e\n\u003cli\u003eComprehensive instruction manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eReviews\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCheck out this lovely review over at the Audette Collection:\u003c\/p\u003e\n\u003cp\u003ehttps:\/\/911bestinclass.com\/en-ch\/pages\/adapt-motorsports-fuse-panel-review\u003c\/p\u003e","brand":"Adapt Motorsport","offers":[{"title":"Front and Rear Kit","offer_id":41534344560737,"sku":"AMS90505040 + AMS9050041","price":345.0,"currency_code":"CHF","in_stock":true},{"title":"Front Kit Only","offer_id":41534344527969,"sku":"AMS9050040","price":310.0,"currency_code":"CHF","in_stock":true},{"title":"Rear Kit Only","offer_id":41534344593505,"sku":"AMS9050041","price":62.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0257\/7357\/2193\/files\/20230426_185309-removebg-preview_1.png?v=1688828054"},{"product_id":"porsche-911-engine-sump-cover-plate","title":"Classic Porsche 911 Engine Sump Cover Plate 2.7\/3.0\/3.2\/Turbo","description":"\u003cp\u003eTired of that old pressed steel engine sump\/cover plate?  Is yours covered in rust and dents?  We have the solution for you.  This CNC machined aluminium cover plate is anodized in dark grey to bring back some beauty to the underside of the aircooled 911 engines.  Stiffer than the original to reduce the chance of leaks, and complete with flush mount sump plug, this comes as a complete kit with nuts, washers and gasket.  It only takes a short time to install at your next oil change.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eAvailable in 3 Versions:\u003c\/p\u003e\n\u003ch3\u003eVersion 1: Low Profile Sump Plate\u003c\/h3\u003e\n\u003cp\u003eThis replaces the standard SC sump plate with the standard oil pipe pickup, and the screen separate strainer.\u003c\/p\u003e\n\u003ch3\u003eVersion 2: Deep Sump Plate\u003c\/h3\u003e\n\u003cp\u003eThis replaces the standard 3.2\/3.0 Turbo and 3.3 Turbo or cars fitted with 3.2\/Turbo\/GT3 oil pumps with the screen fitted to the oil pump. Also compatible with the SC oil pump and screen. \u003c\/p\u003e\n\u003ch3\u003eVersion 3: Turbo Sump Plate\u003c\/h3\u003e\n\u003cp\u003eThis is a special version of the sump plate with two ORB 8 side fittings for turbo oil drains. This is the same depth as the Version 2 sump plate so can be used with SC or 3.2\/Turbo oil pumps.\u003c\/p\u003e\n\u003cp\u003eSign up for our mailing list to keep up to date with this, and other products we are currently developing.  Sign up on our front page here:  \u003ca href=\"https:\/\/adaptmotorsport.com\/\"\u003ehttps:\/\/adaptmotorsport.com\/\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Adapt Motorsport","offers":[{"title":"Version 1: Shallow Sump","offer_id":55970225684854,"sku":"AMS9050051","price":150.0,"currency_code":"CHF","in_stock":true},{"title":"Version 2: Deep Sump","offer_id":55970225717622,"sku":"AMS9050300","price":165.0,"currency_code":"CHF","in_stock":true},{"title":"Version 3: Turbo Sump","offer_id":55970225750390,"sku":"AMS905302","price":205.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0257\/7357\/2193\/files\/Turbo_sump_plate.png?v=1753192468"},{"product_id":"porche-964-intake-manifold-adapter","title":"Porsche 911 2.7 - 3.0 - 3.2 2 bolt to 964\/993 Intake Manifold Adapter Kit","description":"\u003ch2\u003eDescription\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cp\u003eThese adapters are used to adapt the 2.7\/3.0\/3.2 Porsche 911 2 bolt cylinder head engines to the later 964\/993 3.6 intake manifolds when converting to EFI.  CNC machined on a 5 axis machine to our exacting tolerances and finish, and anodised dark grey.  Custom machined to match your port diameter, and tapered to fit the 42mm bore of the manifold.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThe adapters are made as short as possible to allow for clearance at the top of the engine bay for the idle air control valve and throttle body. \u003c\/p\u003e\n\u003cp\u003eThis design permits the use of the standard 964 fuel injectors and fuel rails, as well as our beautiful CNC machined fuel rails. The rail adapters can be cut and are pre-marked for the different length Bosch fuel injectors. The injector position is exactly over the existing relief for the CIS fuel injector.\u003c\/p\u003e\n\u003cp\u003eCheck out our fuel rail and fuel pressure regulator kits to make the perfect conversion set!\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eKey Features:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePrecision machined from high grade aluminium\u003c\/li\u003e\n\u003cli\u003eAnodized finish\u003c\/li\u003e\n\u003cli\u003eFits all Bosch 14mm O-ring fuel injectors\u003c\/li\u003e\n\u003cli\u003eFuel rail spacers are marked for easy cutting to suit long, medium or short injector types.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhats Included:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e6 x CNC aluminium adapters\u003c\/li\u003e\n\u003cli\u003e4 x Spacer\/Posts for fuel rail \u003c\/li\u003e\n\u003cli\u003e4 x Bolts to suit standard full length Bosch injectors\u003c\/li\u003e\n\u003cli\u003e12 x Nuts and washers \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhats Not Included:\u003c\/h2\u003e\n\u003cp\u003eFuel rails, manifolds, rubber joiners, injectors, hose clamps pictured are not included in the sale.\u003c\/p\u003e\n\u003ch3\u003eAddional Options:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAdapters available with complete fuel rail kits.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eLead Time:\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003e39mm Grey and 34, 39mm, 40mm, 41mm and 42mm Black finish units in stock\u003c\/strong\u003e. Other sizes can be manufactured to order, and are available in 34mm, 39mm, 40mm, 42mm and possibly other custom intake sizes.  Typically a 4-5 week lead time.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eSign up for our mailing list to keep up to date with this, and other products we are currently developing.  Sign up on our front page here:  \u003ca href=\"https:\/\/adaptmotorsport.com\/\"\u003ehttps:\/\/adaptmotorsport.com\/\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Adapt Motorsport","offers":[{"title":"34mm Black","offer_id":40581987663969,"sku":"AMS9050074","price":740.0,"currency_code":"CHF","in_stock":true},{"title":"34mm Black+Fuel Rails","offer_id":41820796911713,"sku":"AMS9050074+AMS9050033","price":1050.0,"currency_code":"CHF","in_stock":true},{"title":"39mm Silver\/Grey+Fuel Rails","offer_id":41820796944481,"sku":"AMS9050044+AMS9050033","price":1050.0,"currency_code":"CHF","in_stock":true},{"title":"39mm Black","offer_id":40581987696737,"sku":"AMS9050075","price":740.0,"currency_code":"CHF","in_stock":true},{"title":"39mm Black+Fuel Rails","offer_id":41820796977249,"sku":"AMS9050075+AMS9050033","price":1050.0,"currency_code":"CHF","in_stock":true},{"title":"40mm Black","offer_id":40581987729505,"sku":"AMS9050076","price":740.0,"currency_code":"CHF","in_stock":true},{"title":"40mm Black+Fuel Rails","offer_id":41820797010017,"sku":"AMS9050076+AMS9050033","price":1050.0,"currency_code":"CHF","in_stock":true},{"title":"41mm Black","offer_id":40581987762273,"sku":"AMS9050077","price":740.0,"currency_code":"CHF","in_stock":true},{"title":"41mm Black+Fuel Rails","offer_id":41820797042785,"sku":"AMS9050077+AMS9050033","price":1050.0,"currency_code":"CHF","in_stock":true},{"title":"42mm Black","offer_id":40581987795041,"sku":"AMS9050078","price":740.0,"currency_code":"CHF","in_stock":true},{"title":"42mm Black+Fuel Rails","offer_id":41820806250593,"sku":"AMS9050078+AMS9050033","price":1050.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0257\/7357\/2193\/products\/IntakeAdapterkit_1.png?v=1723813892"},{"product_id":"classic-porsche-911-fuel-rail-kit-3-6l-964-993","title":"Classic Porsche 911 Fuel Rail Kit 3.6L 964\/993","description":"\u003ch2\u003eIn Stock Now!\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cp\u003eOur CNC machined and anodised fuel rail kit bolts directly to the standard 964\/993 intake adapters as well as our own 2 bolt adapters for earlier 2.7, 3.0, 3.2 engines.  Using O ring fittings to the fuel rail, and AN 6 JIC fittings this allows for a very flexible choice of fuel hose arrangements.  Replicate the factory 964 system, or the 993 system, or really simplify and use a dead head system.  Rails are shipped with a combination of fittings or plugs.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eIt is also very easy to add fuel pressure sensing to the rails for those that want to tune, log or use protection strategies in your aftermarket ECU setup.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eCurrently in stock!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eCheck out our matching fuel pressure regulator to complete your fuel system today!\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eWhat is Included:\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e2 x Fuel Rails\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e4 x ORB to JIC Fittings\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e2 x ORB Plugs\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eScrews to fix to factory intake adaptors\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e** Cars with factory air conditioning compressors will need to use the supplied plugs to close the rear end of the fuel rails, and opt for a common \"dead head\" fuel hose arrangement.\u003c\/span\u003e\u003c\/p\u003e","brand":"Adapt Motorsport","offers":[{"title":"Anodised Grey","offer_id":40641700986977,"sku":"AMS9050032","price":356.0,"currency_code":"CHF","in_stock":true},{"title":"Anodised Black","offer_id":40641701019745,"sku":"AMS9050033","price":356.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0257\/7357\/2193\/files\/Fuelrailsblackpic3-Photoroom.png?v=1713882546"},{"product_id":"classic-porsche-fuel-pressure-regulator-2-7-3-0-3-2-3-6","title":"Classic Porsche Fuel Pressure Regulator 911 964 3.6 C2\/C4\/RS, 944, 928","description":"\u003cp\u003eA direct replacement for the  OEM bosch fuel pressure regulators used in many Porsche, Volvo, Mercedes and other makes.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eOur fuel pressure regulator uses the latest Bosch regulators and by default is shipped with a 3.8bar regulator to be a direct replacement.  It is available in alternative pressures of 3.0, 3.5, and 4.0 Bar pressures or an adjustable fuel pressure regulator 2.0-5.0 bar.  This simple and elegant design uses steel O-Ring boss sealing adapters to the manifold with multiple options for hose connections.\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEasy to replace regulator\u003c\/li\u003e\n\u003cli\u003eBosch OEM reliability\u003c\/li\u003e\n\u003cli\u003e3 outlet ports for flexible hose, fitting, gauge, sensor port options - now or for \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe bosch regulator is rated to a maximum fuel flow of 200lpm.  The adjustable pressure regulator flows more and has been tested successfully with a Bosch 044 pump, but we have not yet measured its upper limits. \u003c\/p\u003e\n\u003ch2\u003eWhat is Included in the kit:\u003c\/h2\u003e\n\u003ch3\u003ePorsche 964 \/ Late 928 OEM Fitting Kit\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Fuel pressure regulator body\u003c\/li\u003e\n\u003cli\u003e3 x custom adapter fittings to fit to Porsche OEM hose ends.\u003c\/li\u003e\n\u003cli\u003e1 x ORB Plug\u003c\/li\u003e\n\u003cli\u003e* Mounting bracket not included.  Fits to factory regulator bracket, can be supplied with a our bracket if required for additional cost.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4 style=\"padding-left: 30px;\"\u003eApplications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eReplaces Bosch 0280160297\u003cspan\u003e, and Porsche 92811019825 \u0026amp; 92811019804 \u0026amp; 92811019803 - \u003c\/span\u003e3.8 Bar (engine running, no vacuum line connected)\u003c\/li\u003e\n\u003cli\u003eDirect replacement for Porsche 964 3.6 '89-94 C2\/C4\/RS fuel pressure regulator with factory lines as mounted to the engine breather cover.\u003c\/li\u003e\n\u003cli\u003eDirect replacement for Porsche 928 7\/'88-94 \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eNot suitable for direct replacement for 993 fuel regulator - this is built into the rail.  \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSuits many other vehicles fitted with this bosch regulator such as Bentley Brooklands, Continental, Turbo R, Rolls Royce Corniche, Silver Spur UE73999\u003c\/li\u003e\n\u003cli\u003eCan be used for other applications where lower fuel pressure was used, where it is desired to increase the base fuel pressure, and this can be adjusted in the tuning via ECU mapping.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eOption 1: OEM Replacement, Fixed Regulator, 3.8bar\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eInstalled with Bosch 3.8 bar Fuel pressure regulator \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eOption 2: Custom Model, Adjustable Regulator\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eInstalled with adjustable fuel pressure regulator instead of fixed regulator, not Bosch regulator. 2.0 to 5.0 bar pressure\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eOption 3: Custom Model, Non OEM Fixed Pressure\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eInstalled with other choices of pressure - 3.0, 3.5, 4.0 ** Please nominate at the time of ordering.  3 to 5 additional days required as these are not always kept in stock.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4 style=\"padding-left: 30px;\" data-mce-style=\"padding-left: 30px;\"\u003eAdditional Notes:\u003cbr\u003e\n\u003c\/h4\u003e\n\u003cp\u003e**Other fittings and options such as fuel pressure sensors, or fuel pressure gauges available upon request.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e** Non OEM fitment JIC regulator also available, check the site for product details.\u003c\/p\u003e\n\u003cp\u003e** Replacement fuel pulse dampers now also available, check out our website for product details.\u003c\/p\u003e\n\u003cp\u003e** We can also provide a solution for early 944 replacing Porsche part number \u003cspan data-mce-fragment=\"1\"\u003e94411019801, Bosch part number 0280160214, 0280160216, 0280160215, 0280150105, BMW E23\/E24 635 \/ 735 \/ 745, Citroen CX, Fiat 124, Jaguar XJ, Volvo 240 \/ 340 And others.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Adapt Motorsport","offers":[{"title":"Option 1: OEM Replacement Fixed Regulator 3.8bar","offer_id":40820287832161,"sku":"AMS905006","price":260.0,"currency_code":"CHF","in_stock":true},{"title":"Option 2: Custom Model Adjustable Regulator","offer_id":40820287864929,"sku":"AMS905007","price":285.0,"currency_code":"CHF","in_stock":true},{"title":"Option 3: Custom Model Non OEM Fixed Pressure","offer_id":40820287897697,"sku":"Custom Order","price":260.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0257\/7357\/2193\/files\/TransparentBackground.png?v=1772533677"},{"product_id":"bosch-classic-porsche-fuel-pressure-regulator-911-efi-upgrade","title":"Classic Porsche Fuel Pressure Regulator 911 EFI Upgrade JIC Fittings","description":"\u003cp\u003eThis is the Motorsport\/Custom version of our FPR that uses AN6 JIC fittings and plugs to suit aftermarket fuel lines and fuel rail configurations when converting from CIS to EFI, or removing the later model fuel injection systems for an alternative custom setup.\u003c\/p\u003e\n\u003cp\u003eOur fuel pressure regulator uses the latest Bosch regulators and is available in 3.0, 3.5, 3.8 and 4.0 Bar pressures or an adjustable fuel pressure regulator 1.0-5.0 bar.  This simple and elegant design uses O-Ring boss sealing adapters to the manifold with multiple options for hose connections.  Ultimate hose layout flexibility is achieved through multiple port orientations and options.  This allows for standard 3.2, 964, or 993 fuel hose configurations, or, for dead head configurations where there is a single feed line to each fuel rail, and no return line from the rail, only this regulator.  \u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEasy to replace regulator\u003c\/li\u003e\n\u003cli\u003eBosch OEM reliability\u003c\/li\u003e\n\u003cli\u003e3 outlet ports for flexible hose, fitting, gauge, sensor port options - now or for the future!\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis kit is perfect for any EFI conversion on any of the air cooled 6 cylinder engines.  These can be combined with our fuel rails that fit to either our 2 bolt adapters, or the 964\/993 intake stacks\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThe Bosch regulator is rated to a maximum fuel flow of 200lpm.  The adjustable pressure regulator and Pierburg flows more, but we have not yet measured its upper limits, but it has been proven to work with a Bosch 044 fuel pump at 300lph.\u003c\/p\u003e\n\u003ch4\u003eApplications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eAny custom hose solution with AN\/JIC Fittings for any vehicle with custom hosing and mounting.\u003c\/li\u003e\n\u003cli\u003eAny 911 2.7\/3.0 when removing the CIS and installing your own EFI solution.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat is Included in the kit:\u003c\/h2\u003e\n\u003ch3\u003eOption 1: AN 6 Fitting Kit - Bosch Fixed Pressure Regulator\u003c\/h3\u003e\n\u003cp\u003eOur flexible option uses JIC AN6 fittings, to allow for easy aftermarket lines to be made to suit your installation and hose layout.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Fuel pressure regulator body\u003c\/li\u003e\n\u003cli\u003e1 x Bosch 3.8 bar fuel pressure regulator (Alternative choice of pressure available - 3.0, 3.5, 4.0)  ** Please nominate at the time of ordering.  \u003c\/li\u003e\n\u003cli\u003e4 x AN6 JIC fittings.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e2 x ORB Plugs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003ch3\u003eOption 2: AN 6 Fitting Kit - SPA Adjustable Fuel Pressure Regulator\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Fuel pressure regulator body\u003c\/li\u003e\n\u003cli\u003e1 x 2.0 to 5.0 adjustable fuel pressure regulator instead of fixed regulator\u003c\/li\u003e\n\u003cli\u003e4 x AN6 JIC fittings.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e2 x ORB Plugs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eOption 3: AN 6 Fitting Kit - Pierburg 3.0 Bar\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Fuel pressure regulator body\u003c\/li\u003e\n\u003cli\u003e1 x 3.0 Bar Fixed Pierburg Regulator, High Flow\u003c\/li\u003e\n\u003cli\u003e4 x AN6 JIC fittings.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e2 x ORB Plugs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eOption 4: AN 6 Fitting Kit - Pierburg 3.8 Bar\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Fuel pressure regulator body\u003c\/li\u003e\n\u003cli\u003e1 x 3.8 Bar Fixed Pierburg Regulator, High Flow\u003c\/li\u003e\n\u003cli\u003e4 x AN6 JIC fittings.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e2 x ORB Plugs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eAdditional Notes:\u003c\/h3\u003e\n\u003cp\u003e** Other fittings and options such as fuel pressure sensors, or fuel pressure gauges available upon request.\u003c\/p\u003e\n\u003cp\u003e** Original 964 mounting bracket not suitable. Please purchase our machined bracket, available in store. \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Adapt Motorsport","offers":[{"title":"Option 1: AN 6 JIC Fittings - Fixed Reg","offer_id":39795620053089,"sku":"AMS9050021","price":202.0,"currency_code":"CHF","in_stock":true},{"title":"Option 2: AN 6 JIC Fittings - Adjustable Reg","offer_id":39795634962529,"sku":"AMS9050022","price":236.0,"currency_code":"CHF","in_stock":true},{"title":"Option 3: AN 6 Fitting Kit - Pierburg 3.0 Bar","offer_id":58056288469366,"sku":"AMS9050343","price":215.0,"currency_code":"CHF","in_stock":true},{"title":"Option 4: AN 6 Fitting Kit - Pierburg 3.8 Bar","offer_id":58056288502134,"sku":"AMS9050344","price":215.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0257\/7357\/2193\/files\/3303aae0-9649-42d2-8d7a-00ec42a276c5.png?v=1692273360"},{"product_id":"bosch-classic-porsche-fuel-pressure-regulator-carrera-3-2","title":"Classic Porsche Fuel Pressure Regulator Carrera 3.2 \/ Early (non CIS) 928 OEM Fitting Kit","description":"\u003cp\u003eA direct replacement for the OEM Bosch fuel pressure regulators on the Porsche Carrera 3.2 1983-1989 and early 928 (non CIS) 1980-1986 and some other makes and models.  Most of these regulators are original and now nearly 40 years old.  They are prone to leaking or failure and can cause all sorts of running and tuning issues.  They are easy to replace, albeit a little bit fiddly being at the front of the manifold for the 3.2.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eTo suit the lower operating fuel pressure of the 3.2 Motronic, we use an adjustable fuel pressure regulator.  This simple and elegant design uses steel O-Ring boss sealing adapters to the manifold. \u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEasily replaceable fuel pressure regulator.\u003c\/li\u003e\n\u003cli\u003eSpare outlet for fuel pressure gauge or sensor.\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe adjustable fuel pressure regulator has been tested with Bosch 044 fuel pumps, but the upper limit of fuel flow rate has not been tested.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eWe offer this regulator in two versions. Version 1 is the standard adjustable regulator that can be used on all models referenced below. Version 2, is a fixed 3.8 bar regulator version. This is a direct replacement for the early '87 928's that use the early model regulator design, but with a higher pressure. This can also be used on the other models if the chip or ECU has been tuned for higher fuel pressure.\u003c\/p\u003e\n\u003ch2\u003eWhat is Included in the kit:\u003c\/h2\u003e\n\u003ch3\u003eVersion 1: Porsche Carrera 3.2 \/ Early 928 (non CIS) OEM Fitting Kit - Adjustable Fuel Pressure Regulator\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Fuel pressure regulator body\u003c\/li\u003e\n\u003cli\u003e1 x 2.0 to 5.0 adjustable fuel pressure regulator instead of fixed regulator\u003c\/li\u003e\n\u003cli\u003e2 x Adapter fittings to fit OEM hose and fuel rail ends.\u003c\/li\u003e\n\u003cli\u003e1 x Hose Tail fitting to fit factory return line\u003c\/li\u003e\n\u003cli\u003e1 x ORB Plug\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4 style=\"padding-left: 30px;\"\u003eApplications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eReplaces Bosch\u003cspan\u003e 0280160215 (2.5 Bar no vacuum line connected)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePorsche 92811019801, 92811019800, 92811019826 (2.5 Bar no vacuum line connected)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePorsche 92811019802 (3.0 Bar no vacuum line connected)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eReplaces Bosch 0280160232 , 0280160262 (3.0 bar, no vacuum line connected)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDirect replacement for Porsche Carrera 3.2 '84-89 (2.5 Bar)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDirect replacement for Porsche 928 (non CIS) 80-86 (2.5 Bar) and early 87 (3.0 Bar)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAlso for many Alfa Romeo 145, 133 547 196, 6053 75 280 AlfaSud Sprint, Citroen XM, Peugeot 605, 505, 1563 91 Volvo 760, 780, 1987-1990, 780 1987-1990, 960, Lancia Thema, Renault 74 01 271 135\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor the 2.5 Bar fuel pressure cars, this kit must use the adjustable fuel pressure regulator as Bosch does not produce a standard 2.5bar pressure regulator in this form. We can also provide fixed fuel pressure regulators.\u003c\/p\u003e\n\u003ch3\u003eVersion 2: 1987 Early 928 (non CIS) OEM Fitting Kit - Fixed 3.0bar Fuel Pressure Regulator, Upgrade for other models with re tuning.\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Fuel pressure regulator body\u003c\/li\u003e\n\u003cli\u003e1 x Bosch 3.0 bar fixed fuel pressure regulator\u003c\/li\u003e\n\u003cli\u003e2 x Adapter fittings to fit OEM hose and fuel rail ends.\u003c\/li\u003e\n\u003cli\u003e1 x Hose Tail fitting to fit factory return line\u003c\/li\u003e\n\u003cli\u003e1 x ORB Plug\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4 style=\"padding-left: 30px;\"\u003eApplications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003ePorsche 92811019802 (3.0 Bar no vacuum line connected)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eReplaces Bosch \u003cspan\u003e0280160232, \u003c\/span\u003e\u003cspan\u003e0280160262\u003c\/span\u003e (3.0 Bar no vacuum line connected)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDirect replacement for Porsche 928 (non CIS) early 87 (3.0 Bar)\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eUpgrade replacement for Porsche Carrera 3.2 '84-89 (2.5 Bar to 3.0 bar)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eUpgrade replacement for Porsche 928 (non CIS) 80-86 (2.5 Bar to 3.0 Bar)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAlfa 145 07.94-01.2001, 33 05.83-109.94, sprint 09.76-12.89, 146 12.94-01.2001, Citroen XM 05.89-10.94, XM II 05.94-10.2000,  Peugeot 605 06.89-09.99\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVersion 3: Custom Version\u003c\/h3\u003e\n\u003cp\u003eSame as version 2, but with Bosch fixed 3.8 bar regulator, common with normal EFI conversion pressures.\u003c\/p\u003e\n\u003ch3\u003eAdditional Notes:\u003c\/h3\u003e\n\u003cp\u003e ** The fuel pressure regulator needs to be adjusted and set on the car after installation to ensure the operating conditions meet the factory specifications.  A fuel pressure gauge and fittings to adapt to the factory fuel rails is required to be able to complete this procedure.  The regulators are not shipped pre-set to the 2.5bar operating pressure.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e** We can also provide a solution for early 944 replacing Porsche part number \u003c\/span\u003e\u003cspan\u003e94411019801, Bosch part number 0280160214, 0280160216, 0280160215, 0280150105, BMW E23\/E24 635 \/ 735 \/ 745, Citroen CX, Fiat 124, Jaguar XJ, Volvo 240 \/ 340 And others.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e** Please compare your original factory part number to those listed above. Sometimes these have been changed from the original installed units on the vehicle by previous owners or workshops.\u003c\/span\u003e\u003c\/p\u003e","brand":"Adapt Motorsport","offers":[{"title":"3.2 Carrera \/ Early 928 Adjustable Reg.","offer_id":39795639943265,"sku":"AMS9050009","price":275.0,"currency_code":"CHF","in_stock":true},{"title":"Porsche '87 928 3.0 Bar Fixed And other Makes","offer_id":41317607047265,"sku":"AMS9050124","price":260.0,"currency_code":"CHF","in_stock":true},{"title":"Custom 3.8 Bar Variant","offer_id":55722779902326,"sku":"AMS9050008","price":260.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0257\/7357\/2193\/products\/4.5BarAdjustableReg.png?v=1772716085"},{"product_id":"classic-porsche-fuel-pressure-damper-911-3-2-carrera-and-928","title":"Classic Porsche Fuel Pressure Damper 911 3.2 Carrera and 928","description":"\u003cp\u003eA direct replacement for the no longer available OEM Bosch fuel pressure dampers used in many Porsche, Volvo, Mercedes and other makes.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eOur fuel pressure damper uses the latest OEM pulse damper to be a direct replacement to the aging and leaking fuel pressure dampers. This simple and elegant design uses steel O-Ring boss sealing adapters to the manifold with multiple options for hose connections.\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEasy to replace damper\u003c\/li\u003e\n\u003cli\u003eBosch OEM reliability\u003c\/li\u003e\n\u003cli\u003eSpare outlet port for fuel pressure sensor. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat is Included in the kit:\u003c\/h2\u003e\n\u003ch3\u003eCarrera 3.2 \/ 928 OEM Fitting Kit\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Fuel pressure damper body\u003c\/li\u003e\n\u003cli\u003e1 x Pressure damper\u003c\/li\u003e\n\u003cli\u003e2 x custom adapter fittings to fit to Porsche OEM hose ends.\u003c\/li\u003e\n\u003cli\u003e1 x Custom mounting plug to factory bracket\u003c\/li\u003e\n\u003cli\u003e1 x ORB Plug\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4 style=\"padding-left: 30px;\"\u003eApplications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eReplaces \u003cspan\u003ePorsche 93011060201, 93011060230 93011060231 and Bosch 0 280 161 035 and 0 280 161 021\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eDirect replacement for Porsche 911 Carrera 3.2 '84-89 fuel pressure damper as mounted to the fuel rail.\u003c\/li\u003e\n\u003cli\u003eDirect replacement for Porsche 928 '85-95 Rear pulse damper \u003c\/li\u003e\n\u003cli\u003eAlso replacement Renault Alpine A610, V6 77 00 266 953\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAdditional Notes:\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cp\u003e** Replacement fuel pressure regulators now also available, check out our website for product details.\u003c\/p\u003e\n\u003cp\u003e\"\" The product comes fully assembled and ready to install.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\"\"\u003c\/span\u003e\u003cspan\u003e Vacuum Port. Adapt Motorsport \u003c\/span\u003e\u003cspan\u003edampers \u003c\/span\u003e\u003cspan\u003euse a Bosch damper module. These modules do not use a vacuum reference port like the original installed units. The existing vacuum line can be plugged, or removed and capped. This does not affect the damping performance of the module.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Adapt Motorsport","offers":[{"title":"Default Title","offer_id":39852948881505,"sku":"AMS9050024","price":260.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0257\/7357\/2193\/products\/2portdamper_1.png?v=1772716130"},{"product_id":"classic-porsche-fuel-pressure-damper-911-928","title":"Classic Porsche Fuel Pressure Damper 928","description":"\u003cp\u003eA direct replacement for the no longer available OEM Bosch fuel pressure dampers used in many Porsche, Volvo, Mercedes and other makes.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eOur fuel pressure damper uses the latest OEM pulse damper to be a direct replacement to the aging and leaking fuel pressure dampers. This simple and elegant design uses steel O-Ring boss sealing adapters to the manifold with multiple options for hose connections.\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEasy to replace damper\u003c\/li\u003e\n\u003cli\u003eBosch OEM reliability\u003c\/li\u003e\n\u003cli\u003eSpare outlet port for fuel pressure sensor. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat is Included in the kit:\u003c\/h2\u003e\n\u003ch3\u003e928 OEM Fitting Kit (Front)\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Fuel pressure damper body\u003c\/li\u003e\n\u003cli\u003e1 x Pressure damper\u003c\/li\u003e\n\u003cli\u003e3 x custom adapter fittings to fit to Porsche OEM hose ends.\u003c\/li\u003e\n\u003cli\u003e1 x ORB Plug\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4 style=\"padding-left: 30px;\" data-mce-style=\"padding-left: 30px;\"\u003eApplications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eReplaces \u003cspan\u003ePorsche 92811020200, 92811020222, 92811020201, 9281102023, and Bosch 0280161008, 0280161034 \u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eDirect replacement for Porsche 928 '83-95 front pulse damper \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAdditional Notes:\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cp\u003e** Replacement fuel pressure regulators now also available, check out our website for product details.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\"\" The product comes fully assembled and ready to install.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\"\"\u003c\/span\u003e\u003cspan\u003e Vacuum Port. Adapt Motorsport \u003c\/span\u003e\u003cspan\u003edampers \u003c\/span\u003e\u003cspan\u003euse a Bosch damper module. These modules do not use a vacuum reference port like the original installed units. The existing vacuum line can be plugged, or removed and capped. This does not affect the damping performance of the module.\u003c\/span\u003e\u003c\/p\u003e","brand":"Adapt Motorsport","offers":[{"title":"Default Title","offer_id":39852963758177,"sku":"AMS9050025","price":260.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0257\/7357\/2193\/products\/damper_3portthreaded.png?v=1669827782"},{"product_id":"classic-porsche-911-fuel-rail-kit-3-2l-carrera","title":"Classic Porsche 911 Fuel Rail Kit 3.2L Carrera","description":"\u003cp\u003eOur billet and anodised fuel rail kit bolts directly to the standard 3.2 intake manifold.  Using O ring fittings to the fuel rail, and AN 6 JIC fittings this allows for a very flexible choice of fuel hose arrangements.  Replicate the factory 964 system, or the 993 system, or really simplify and use a dead head system.  Rails are shipped with a combination of fittings or plugs.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eIt is also very easy to add fuel pressure sensing to the rails for those that want to tune, log or use protection strategies in your aftermarket ECU setup.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eCheck out our matching fuel pressure regulator to complete your fuel system today!\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eWhat is Included:\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e2 x Fuel Rails\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e4 x ORB to JIC Fittings\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e2 x ORB Plugs\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e2 x Anodised support adapters\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eScrews to fix to factory intake adaptors\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e** Cars with factory air conditioning compressors will need to use the supplied plugs to close the rear end of the fuel rails, and opt for a common \"dead head\" fuel hose arrangement.\u003c\/p\u003e","brand":"Adapt Motorsport","offers":[{"title":"Anodised Black","offer_id":40641700954209,"sku":"AMS9050033+AMS9050073","price":376.0,"currency_code":"CHF","in_stock":true},{"title":"Anodised Silver","offer_id":58522855768438,"sku":"AMS9050032-1+AMS9050073","price":376.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0257\/7357\/2193\/files\/Fuelrailsblackpic2-Photoroom.png?v=1713881818"},{"product_id":"classic-porsche-fuel-pressure-damper-944-944-turbo","title":"Classic Porsche Fuel Pressure Damper 944 \/ S \/ S2 \/ Turbo, 924 S","description":"\u003cp\u003eA direct replacement for the no longer available OEM Bosch fuel pressure dampers used in many Porsche, Volvo, Mercedes and other makes.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eOur fuel pressure damper uses the latest OEM pulse damper to be a direct replacement to the aging and leaking fuel pressure dampers. This simple and elegant design uses steel O-Ring boss sealing adapters to the manifold with multiple options for hose connections.\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEasy to replace damper\u003c\/li\u003e\n\u003cli\u003eBosch OEM reliability\u003c\/li\u003e\n\u003cli\u003eSpare outlet port for fuel pressure sensor. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat is Included in the kit:\u003c\/h2\u003e\n\u003ch3\u003e944 OEM Fitting Kit\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Fuel pressure damper body\u003c\/li\u003e\n\u003cli\u003e1 x Pressure damper\u003c\/li\u003e\n\u003cli\u003e2 x custom adapter fittings to fit to Porsche OEM hose ends.\u003c\/li\u003e\n\u003cli\u003e2 x ORB Plug\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4 style=\"padding-left: 30px;\" data-mce-style=\"padding-left: 30px;\"\u003eApplications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eReplaces \u003cspan\u003ePorsche part 944 110 201 00, 944 110 201 01, 944 110 201 03, 944 110 201 04, 944 110 201 06,\u003cb data-mce-fragment=\"1\"\u003e \u003c\/b\u003e944 110 201 07, \u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eTake care, there are two different model dampers on the 944, the other version has the part number 944 and 924 110 201 01 or Bosch 0 280 161 018 and has only one port.  We can supply this part also.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eDirect replacement for Bosch 0 280 161 015, 0 280 161 \u003c\/span\u003e036\u003c\/li\u003e\n\u003cli\u003eDirect replacement for Porsche 944 8V NA '83 to '88, 944s '87 to '88, 944 S2 '89 to '91, 944 turbo 87 to 89\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAdditional Notes:\u003c\/h3\u003e\n\u003cp\u003eThe product comes fully assembled and ready to install.\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003e\"\"\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e Vacuum Port. Adapt Motorsport \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003edampers \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003euse a Bosch damper module. These modules do not use a vacuum reference port like the original installed units. The existing vacuum line can be plugged, or removed and capped. This does not affect the damping performance of the module.\u003c\/span\u003ele.\u003c\/p\u003e","brand":"Adapt Motorsport","offers":[{"title":"Default Title","offer_id":40570475741281,"sku":"AMS9050027","price":260.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0257\/7357\/2193\/products\/Porsche944928924Damper.png?v=1673213789"},{"product_id":"classic-porsche-fuel-pressure-regulator-944-oem-fitting-kit","title":"Classic Porsche Fuel Pressure Regulator 944 '82-'85, 924 S '81-'84 OEM Fitting Kit","description":"\u003cp\u003eDirect replacement for the OEM Bosch fuel pressure regulators on the Porsche 944 and some other makes and models.  Most of these regulators are original and now nearly 40 years old.  They are prone to leaking or failure and can cause all sorts of running and tuning issues.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eTo suit the lower operating fuel pressure of the 3.2 Motronic, we use an adjustable fuel pressure regulator.  This simple and elegant design uses steel O-Ring boss sealing adapters to the manifold. \u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEasily replaceable fuel pressure regulator.\u003c\/li\u003e\n\u003cli\u003eSpare outlet for fuel pressure gauge or sensor.\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe adjustable fuel pressure regulator has been tested with Bosch 044 fuel pumps, but the upper limit of fuel flow rate has not been tested.\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eWhat is Included in the kit:\u003c\/h2\u003e\n\u003ch3\u003ePorsche 944 OEM Fitting Kit - SPA Adjustable Fuel Pressure Regulator\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Fuel pressure regulator body\u003c\/li\u003e\n\u003cli\u003e1 x 2.0 to 5.0 adjustable fuel pressure regulator instead of fixed regulator\u003c\/li\u003e\n\u003cli\u003e1 x Adapter fittings to fit OEM hose and fuel rail ends.\u003c\/li\u003e\n\u003cli\u003e1 x Hose Tail fitting to fit factory return line\u003c\/li\u003e\n\u003cli\u003e2 x ORB Plug\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4 style=\"padding-left: 30px;\"\u003eApplications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eReplaces Porsche part number 944 110 198 01 for Porsche 944 '82 to '85 with the M44.02 and M44.04 engines. 2.5 bar base fuel pressure.\u003c\/li\u003e\n\u003cli\u003eReplacement for Bosch 0 280 160 214\u003c\/li\u003e\n\u003cli\u003eAlso for many Alfa Romeo Spider 116 85 32 045 00, 6052 28 930, Citroen CX \u0026amp; Peugeot 6052340, Volvo 760 1987-1990, 780 1987-1990, 960, Fiat \/ Lancia Strada \/ 124 Prisma 6052340 60522893, 4430290, Ford Sierra Transit 85TF 9P917AB, Jaguar XJ 73232A, Renault Prisma 77 00 680 165, BMW E23 E24 E28 13 531 273 329, SAAB 900 750 164, Volvo 240, 242, 244, 245, 246, 740, 745 \u0026amp; 340-360\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis kit must use the adjustable fuel pressure regulator as Bosch does not produce a standard 2.5bar pressure regulator in this form.  If you have aftermarket fuel injection where you can adjust the fuel pressure settings in your ECU and would like the Bosch fuel pressure regulator in the available 3.0, 3.5, 3.8, 4.0 pressures we can provide this  at the time of purchase or reach out to us and we can customise a product for you.\u003c\/p\u003e\n\u003ch3\u003eAdditional Notes:\u003c\/h3\u003e\n\u003cp\u003e** Other fittings and options such as fuel pressure sensors, or fuel pressure gauges available upon request.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e** We have also developed fuel pressure dampers for the 3.2 and 928 engines, check out our site for the product details.\u003c\/p\u003e\n\u003cp\u003e ** The fuel pressure regulator needs to be adjusted and set on the car after installation to ensure the operating conditions meet the factory specifications.  A fuel pressure gauge and fittings to adapt to the factory fuel rails is required to be able to complete this procedure.  The regulators are not shipped pre-set to the 2.5bar operating pressure.\u003c\/p\u003e\n\u003cp\u003e** We also stock the 944 fuel pressure damper as a direct replacement.\u003c\/p\u003e","brand":"Adapt Motorsport","offers":[{"title":"944 Early 924 Early","offer_id":40641643642977,"sku":"AMS9050048","price":265.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0257\/7357\/2193\/products\/Untitleddesign.png?v=1673213921"},{"product_id":"classic-porsche-fuel-pressure-damper-944-82-85-single-port","title":"Classic Porsche Fuel Pressure Damper 944 '82-'85 Single Port","description":"\u003cp\u003eA direct replacement for the no longer available OEM Bosch fuel pressure dampers used in many Porsche, Volvo, Mercedes and other makes.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eOur fuel pressure damper uses the latest OEM pulse damper to be a direct replacement to the aging and leaking fuel pressure dampers. This simple and elegant design uses steel O-Ring boss sealing adapters to the manifold with multiple options for hose connections.\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEasy to replace damper\u003c\/li\u003e\n\u003cli\u003eBosch OEM reliability\u003c\/li\u003e\n\u003cli\u003eSpare outlet port for fuel pressure sensor. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat is Included in the kit:\u003c\/h2\u003e\n\u003ch3\u003e944 OEM Fitting Kit\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Fuel pressure damper body\u003c\/li\u003e\n\u003cli\u003e1 x Pressure damper\u003c\/li\u003e\n\u003cli\u003e2 x custom adapter fittings to fit to Porsche OEM hose end and fastening screw.\u003c\/li\u003e\n\u003cli\u003e2 x ORB Plug\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4 style=\"padding-left: 30px;\" data-mce-style=\"padding-left: 30px;\"\u003eApplications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eReplaces \u003cspan\u003ePorsche part 944 110 201 01 \u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eReplaces Bosch 0 280 161 018\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eTake care, there are two different model dampers on the 944, the other version has the part number 944 110 201 03 or Bosch 0 280 161 015 and has two ports.  We can supply this part also.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eDirect replacement for Porsche 944 8V NA '83 to '85\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAdditional Notes:\u003c\/h3\u003e\n\u003cp\u003e\"\" The product comes fully assembled and ready to install.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\"\" Vacuum Port. Adapt Motorsport dampers use a Bosch damper module. These modules do not use a vacuum reference port like the original installed units. The existing vacuum line can be plugged, or removed and capped. This does not affect the damping performance of the module.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Adapt Motorsport","offers":[{"title":"Default Title","offer_id":40643921838177,"sku":"AMS9050028","price":260.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0257\/7357\/2193\/products\/944924FuelPressureDamper2.png?v=1673295153"},{"product_id":"porsche-911-2-7-3-0-3-2-2-bolt-to-996-gt3-intake-manifold-adapter-kit","title":"Porsche 911 2.7 \/ 3.0 \/ 3.2 2 bolt to 996 GT3 Intake Manifold Adapter Kit","description":"\u003ch2\u003eDescription\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cp\u003eThese adapters are used to adapt the 2.7\/3.0\/3.2 Porsche 911 2 bolt cylinder head engines to the 996 GT3 intake manifolds when converting to EFI.  CNC machined our exacting tolerances and finish, and anodised black.  Machined to match your port diameter, and tapered to fit the 48mm bore of the manifold.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eTheir short height maintains the overall height of the intake set, reducing the interference between the idle air control and the intake boot and the top of the engine bay insulation.  \u003c\/p\u003e\n\u003cp\u003eThis design permits the use of the AMS fuel rails, and positions the injector over the same relief in the intake port for the original CIS injector, ensuring proper atomisation of the injector spray into the intake port.\u003c\/p\u003e\n\u003cp\u003eCheck out our fuel rail and fuel pressure regulator kits to make the perfect conversion set!\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eKey Features:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePrecision machined from high grade aluminium\u003c\/li\u003e\n\u003cli\u003eAnodized finish\u003c\/li\u003e\n\u003cli\u003eFits all Bosch 14mm O-ring fuel injectors\u003c\/li\u003e\n\u003cli\u003eFuel rail spacers are marked for easy cutting to suit long, medium or short injector types.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhats Included:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e6 x CNC aluminium adapters\u003c\/li\u003e\n\u003cli\u003e4 x Spacer\/Posts for fuel rail \u003c\/li\u003e\n\u003cli\u003e4 x Bolts to suit standard full length Bosch injectors\u003c\/li\u003e\n\u003cli\u003e12 x Nuts and washers for cylinder head studs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhats Not Included:\u003c\/h2\u003e\n\u003cp\u003eFuel rails, manifolds, rubber joiners, injectors, hose clamps pictured are not included in the sale.\u003c\/p\u003e\n\u003ch2\u003eLead Time:\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003e40mm \u0026amp; 42mm units in stock\u003c\/strong\u003e. Other sizes can be manufactured to order.  Typically a 4-5 week lead time.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eSign up for our mailing list to keep up to date with this, and other products we are currently developing.  Sign up on our front page here:  \u003ca href=\"https:\/\/adaptmotorsport.com\/\"\u003ehttps:\/\/adaptmotorsport.com\/\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Adapt Motorsport","offers":[{"title":"40mm Black, Adapter Kit Only","offer_id":40741801623649,"sku":"AMS9050082","price":785.0,"currency_code":"CHF","in_stock":true},{"title":"40mm Back, Adapter Kit + Fuel Rail Kit","offer_id":41062008815713,"sku":"AMS9050082+AMS9050033","price":1095.0,"currency_code":"CHF","in_stock":true},{"title":"42mm Black, Adapter Kit Only","offer_id":40741801656417,"sku":"AMS9050084","price":785.0,"currency_code":"CHF","in_stock":true},{"title":"42mm Black, Adapter Kit + Fuel Rail Kit","offer_id":41062011338849,"sku":"AMS9050084+AMS9050033","price":1095.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0257\/7357\/2193\/files\/file_26.png?v=1723814979"},{"product_id":"classic-fuel-pressure-regulator-bosch-replacement","title":"Classic Fuel Pressure Regulator, Bosch Replacement","description":"\u003cp\u003eA direct replacement for the OEM Bosch fuel pressure regulators used in many Jaguar, Alpine, Renault, Landrover, VW, Holden, Opel.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eOur fuel pressure regulator uses the latest Bosch OEM regulator module to be a direct replacement to the aging and leaking units. This simple and elegant design uses steel O-Ring boss sealing adapters to the manifold with multiple options for hose connections.\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEasy to replace regulator\u003c\/li\u003e\n\u003cli\u003e3.0bar pressure rating\u003c\/li\u003e\n\u003cli\u003eBosch OEM reliability\u003c\/li\u003e\n\u003cli\u003eSpare outlet port for fuel pressure sensor. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis regulator uses M14 threaded fittings, which are smaller than most of this type of regulator that uses M16 fittings. If your regulator uses a 17mm spanner for the nuts, then this is an M14 fitting regulator.\u003c\/p\u003e\n\u003ch2\u003eWhat is Included in the kit:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Fuel pressure regulator body\u003c\/li\u003e\n\u003cli\u003e1 x Bosch regulator module\u003c\/li\u003e\n\u003cli\u003e2 x custom adapter fittings to fit to Porsche OEM hose ends.\u003c\/li\u003e\n\u003cli\u003e2 x ORB Plug\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4 style=\"padding-left: 30px;\" data-mce-style=\"padding-left: 30px;\"\u003eApplications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eDirect replacement for Bosch 0 280 160 234, 0 280 160 236, 0 280 160 279\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eAlpine A610 Coupe 1991-1995\u003c\/li\u003e\n\u003cli\u003eAudi 200 C3 1989-1991, Coupe B3 1990-1992, Audi Quattro 1989-1991 034133534M 034133534N\u003c\/li\u003e\n\u003cli\u003eJaguar XJ6 1986-1997, XJS 1983-1986\u003c\/li\u003e\n\u003cli\u003eLand Rover Range Rover 1996-2002\u003c\/li\u003e\n\u003cli\u003eGM 92018573\u003c\/li\u003e\n\u003cli\u003eRover EBC2606, EBC2674, EAC5714, EAC6314K, EBC2607, FDB940, EAC6030, EAC6314, ETC8494\u003c\/li\u003e\n\u003cli\u003eRenault 25 1987-1992 7700266768\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAdditional Notes:\u003c\/h3\u003e\n\u003cp\u003eThe product comes fully assembled and ready to install.\u003c\/p\u003e","brand":"Adapt Motorsport","offers":[{"title":"Default Title","offer_id":40956923150433,"sku":"AMS9050090","price":260.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0257\/7357\/2193\/files\/Porsche944928924Damper_cca717e0-9199-4193-b429-0369911e9018.png?v=1692901419"},{"product_id":"classic-porsche-fuel-pressure-regulator-direct-mount","title":"Classic Porsche Fuel Pressure Regulator 944 Direct Mount","description":"\u003ch1\u003eIn Stock Now!\u003c\/h1\u003e\n\u003cp\u003eDirect replacement for the OEM Bosch fuel pressure regulators on the Porsche 924s, 944, 944S, S2 and Turbo and many other makes and models.  Most of these regulators are original and now nearly 40 years old.  They are prone to leaking or failure and can cause all sorts of running and tuning issues.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eFor the Turbo team, if you need to increase fuel pressure to get more fuel out of the system to match your preferred tuning chip, the adjustable regulator makes this a simple task.\u003c\/p\u003e\n\u003cp\u003eTo suit the lower operating fuel pressure of the Motronic, we use an adjustable fuel pressure regulator.  This simple and elegant design is a direct fit to the factory fuel system.\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEasily replaceable fuel pressure regulator.\u003c\/li\u003e\n\u003cli\u003eDirect O-ring fit to factory fuel rail\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHose barb return line fitting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe adjustable fuel pressure regulator has been tested with Bosch 044 fuel pumps and work well for this higher flow rate. The upper limit of fuel flow rate has not been tested.\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eWhat is Included in the kit:\u003c\/h2\u003e\n\u003ch3\u003ePorsche 944 OEM Fitting Kit - Adjustable Fuel Pressure Regulator, 8mm Barb outlet\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Fuel pressure regulator body\u003c\/li\u003e\n\u003cli\u003e1 x 2.0 to 5.0 adjustable fuel pressure regulator instead of fixed regulator\u003c\/li\u003e\n\u003cli\u003e8mm barb outlet fitting\u003c\/li\u003e\n\u003cli\u003eCap screw fasteners and lock washers.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4 style=\"padding-left: 30px;\"\u003eApplications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eReplaces Porsche part number 944 110 198 01 for Porsche 944 NA '82 to '85 with M44.02 \u0026amp; M44.04 when set to 2.5 bar pressure.\u003c\/li\u003e\n\u003cli\u003eReplaces Porsche part number 944 110 198 03 for Porsche 944 NA '85\/2 to '88 with M44.5-10, 944 Turbo '86-91 with M44.51 and M44.52 to 47K 02563, and 924s '86-88, when set to 2.5 bar pressure.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eReplaces Porsche part number 944 110 198 04 for Porsche 944 NA 1988 with M44.40, 944S with M44.11 to engine number 46K 02979 and M44.12 through to engine number 46K 61255 1987-1988 when set to 3.8bar pressure\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"text-decoration: underline;\"\u003eNot suitable\u003c\/span\u003e for 944 turbo engine M44.52 from engine number 47K 02564 onwards with threaded fitting on bottom port of regulator 944 110 198 05 and 944 110 198 06, Bosch 0 280 160 286 and 0 280 160 287, unless changing the threaded return line to a plain hose and hose clip.\u003c\/li\u003e\n\u003cli\u003eReplacement for Bosch 0 280 160 214 and 0 280 160 227 when set to 2.5 bar\u003c\/li\u003e\n\u003cli\u003eReplacement for Bosch 0 280 160 263 when set to 3.8 Bar\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAdditional Notes:\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cp\u003e** Other fittings and options such as fuel pressure sensors, or fuel pressure gauges available upon request.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e** On some cars, the fuel pressure regulator may have been changed to a different version, please check the installed regulator and make sure it is the same. As the installed regulator and hoses may not match the car and engine model and year referenced above.\u003c\/p\u003e\n\u003cp\u003e** The fuel pressure regulator needs to be adjusted and set on the car after installation to ensure the operating conditions meet the factory specifications.  A fuel pressure gauge and fittings to adapt to the factory fuel rails is required to be able to complete this procedure.  The regulators are not shipped pre-set to the 2.5bar operating pressure.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e** We also stock the 944 fuel pressure damper as a direct replacement.\u003c\/p\u003e","brand":"Adapt Motorsport","offers":[{"title":"Adjustable REgulator","offer_id":40973486129249,"sku":"AMS9050101","price":265.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0257\/7357\/2193\/files\/20231019_091508-fotor-bg-remover-20231019155259.png?v=1697801109"},{"product_id":"porsche-911-3-6-964-993-3-bolt-to-996-gt3-intake-manifold-adapter-kit","title":"Porsche 911 3.6 964 993 3 bolt to 996 GT3 Intake Manifold Adapter Kit","description":"\u003ch2\u003eIn Stock!\u003c\/h2\u003e\n\u003ch2\u003eDescription\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cp\u003eThese adapters are used to adapt the 996 GT3 intake manifolds onto your classic aircooled 964\/996 or G model with the later 3.6 engine.  CNC machined our exacting tolerances and finish, and anodised black.  Custom machined to match your port diameter, and tapered to fit the 49mm bore of the manifold.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eTheir short height maintains the overall height of the intake set, reducing the interference between the idle air control and the intake boot and the top of the engine bay insulation.  \u003c\/p\u003e\n\u003cp\u003eThis design permits the use of the AMS fuel rails, and positions the injector over the same relief in the intake port for the original injector, ensuring proper atomisation of the injector spray into the intake port.\u003c\/p\u003e\n\u003cp\u003eThe adapters come with fuel rail posts, in standard form, these accept all Bosch EV1, 6, 14 long body injectors. The posts are marked for easy cutting to suit the mid and short length EV injectors. This gives ultimate flexibility for injector selection.\u003c\/p\u003e\n\u003cp\u003eAdditional length adapters for those wanting longer runners. Standard adapter height is 78mm, tall version is +35mm, 113mm total.\u003c\/p\u003e\n\u003cp\u003eNow Available, upgrade to our single advanced fuel rail with built in fuel pressure regulator and damper, simplifies number of hoses and fittings required for fuel system installation. Listed price is an upgrade to the adapter and fuel rail kits. Only available in combination with an adapter kit, with fuel rails, not available separately, or with adapter only kits. For a fuel rail kit without adapters, see our other product listings.\u003c\/p\u003e\n\u003cp\u003eCheck out our complete kits and other parts such as fuel pressure regulator kits to make the perfect upgrade set!\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eKey Features:\u003c\/li\u003e\n\u003cli\u003ePrecision machined from high grade aluminium\u003c\/li\u003e\n\u003cli\u003eAnodized finish in black\u003c\/li\u003e\n\u003cli\u003eFits all Bosch 14mm O-ring fuel injectors, long, medium and short\u003c\/li\u003e\n\u003cli\u003eFuel rail spacers are marked for easy cutting to suit long, medium or short injector types.\u003c\/li\u003e\n\u003cli\u003eFuel rails and fittings\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eLimited Number, Non Power Steering Versions\u003c\/h2\u003e\n\u003cp\u003eWe have a limited batch of intake adapters that are suitable for cars without the hydraulic power steering pump, such as when installed in G model bodies, or using electric power steering. these versions are stated as \"No PS\" in the product selection. These will not fit 964\/993 with power steering pumps installed.\u003c\/p\u003e\n\u003ch2\u003eWhats Included:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e6 x CNC aluminium adapters\u003c\/li\u003e\n\u003cli\u003e4 x Spacer\/Posts for fuel rail \u003c\/li\u003e\n\u003cli\u003e4 x Bolts to suit standard full length Bosch injectors\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat Is Not Included:\u003c\/h2\u003e\n\u003cp\u003eManifolds, rubber joiners, injectors, hose clamps are not included in the sale, but are available separately.\u003c\/p\u003e\n\u003ch2\u003eModel Fitment\u003c\/h2\u003e\n\u003cp\u003eStandard 964 intake ports are 41.5mm, so order 42mm adapters\u003c\/p\u003e\n\u003cp\u003eStandard 993 intake ports are 43.5mm, so order 44mm adapters\u003c\/p\u003e\n\u003cp\u003eRS or non standard ports available such as 46mm.\u003c\/p\u003e\n\u003ch2\u003eLead Time:\u003c\/h2\u003e\n\u003cp\u003e42mm (964) and 44mm (993) Units in Stock. Custom sizes or colours are typically a 5 week lead time. Can be made in 46mm diameters also.\u003c\/p\u003e\n\u003cp\u003eSign up for our mailing list to keep up to date with this, and other products we are currently developing.  Sign up on our front page here:  \u003ca href=\"https:\/\/adaptmotorsport.com\/\"\u003ehttps:\/\/adaptmotorsport.com\/\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Adapt Motorsport","offers":[{"title":"42mm Black, Adapter Kit Only","offer_id":41062012715105,"sku":"AMS9050094","price":870.0,"currency_code":"CHF","in_stock":true},{"title":"42mm Black, Adapter Kit + Fuel Rail Kit","offer_id":40973532495969,"sku":"AMS9050094+AMS9050033","price":1180.0,"currency_code":"CHF","in_stock":true},{"title":"44mm Black, Adapter Kit Only","offer_id":41062012911713,"sku":"AMS9050095","price":870.0,"currency_code":"CHF","in_stock":true},{"title":"44mm Black, Adapter Kit + Fuel Rail Kit","offer_id":40973532528737,"sku":"AMS9050095+AMS9050033","price":1180.0,"currency_code":"CHF","in_stock":true},{"title":"46 mm Tall Version Black Adapter Kit + Fuel Rail Kit","offer_id":57332860486006,"sku":null,"price":1180.0,"currency_code":"CHF","in_stock":true},{"title":"42mm Black Adapter Kit + Fuel Rail Kit No PS","offer_id":57330856591734,"sku":null,"price":1060.0,"currency_code":"CHF","in_stock":true},{"title":"44 mm Black Adapter Kit + Fuel Rail Kit No PS","offer_id":57330856624502,"sku":null,"price":1060.0,"currency_code":"CHF","in_stock":true},{"title":"46 mm Black Adapter Kit + Fuel rail kit No PS","offer_id":57332860518774,"sku":null,"price":1060.0,"currency_code":"CHF","in_stock":true},{"title":"Advanced Fuel Rail Upgrade Single","offer_id":57332917535094,"sku":null,"price":260.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0257\/7357\/2193\/files\/20231107_185740-removebg-preview.png?v=1699968249"},{"product_id":"classic-porsche-fuel-pressure-regulator-direct-mount-1","title":"Classic Porsche Fuel Pressure Regulator 944 Direct Mount, M14 Outlet","description":"\u003cp\u003eDirect replacement for the OEM Bosch fuel pressure regulators on the later Porsche  944S, S2 and Turbo and many other makes and models.  Most of these regulators are original and now nearly 40 years old.  They are prone to leaking or failure and can cause all sorts of running and tuning issues.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eFor the Turbo team, if you need to increase fuel pressure to get more fuel out of the system to match your preferred tuning chip, the adjustable regulator makes this a simple task.\u003c\/p\u003e\n\u003cp\u003eTo suit the lower operating fuel pressure of the Motronic, we use an adjustable fuel pressure regulator.  This simple and elegant design is a direct fit to the factory fuel system.\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEasily replaceable fuel pressure regulator.\u003c\/li\u003e\n\u003cli\u003eDirect O-ring fit to factory fuel rail\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eM14 threaded return line fitting\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe adjustable fuel pressure regulator has been tested with Bosch 044 fuel pumps and work well for this higher flow rate. The upper limit of fuel flow rate has not been tested.\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eWhat is Included in the kit:\u003c\/h2\u003e\n\u003ch3\u003ePorsche 944 OEM Fitting Kit - Adjustable Fuel Pressure Regulator\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Fuel pressure regulator body\u003c\/li\u003e\n\u003cli\u003e1 x 2.0 to 5.0 adjustable fuel pressure regulator instead of fixed regulator\u003c\/li\u003e\n\u003cli\u003eM14 threaded outlet fitting\u003c\/li\u003e\n\u003cli\u003eCap screw fasteners and lock washers.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4 style=\"padding-left: 30px;\"\u003eApplications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eReplaces Porsche part number 944 110 198 05 for Porsche 944 NA '88 with M44.02 \u0026amp; M44.04 and 944 Turbo '88-92 with M44.52 when set to 2.5 bar pressure.\u003c\/li\u003e\n\u003cli\u003eReplaces Porsche part number 944 110 198 06 for Porsche 944 NA '88-89 , 944 S2 '89 - '92, 968 '92 to '94 with M44.11, M44.12, M44.41, M44.43\/44 to 3.8 bar pressure.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eNot suitable for cars with 5\/16\" barb fitting on bottom of regulator for return line, threaded fitting only, see our alternative part for the barb version.\u003c\/li\u003e\n\u003cli\u003eReplacement for Bosch 0 280 160 286 when set to 2.5 bar\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eReplacement for Bosch 0 280 160 287 when set to 3.8 Bar\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAdditional Notes:\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cp\u003e** Other fittings and options such as fuel pressure sensors, or fuel pressure gauges available upon request.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e** On some cars, the fuel pressure regulator may have been changed to a different version, please check the installed regulator and make sure it is the same. As the installed regulator and hoses may not match the car and engine model and year referenced above.\u003c\/p\u003e\n\u003cp\u003e** The fuel pressure regulator needs to be adjusted and set on the car after installation to ensure the operating conditions meet the factory specifications.  A fuel pressure gauge and fittings to adapt to the factory fuel rails is required to be able to complete this procedure.  The regulators are not shipped pre-set to the 2.5bar operating pressure.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e** We also stock the 944 fuel pressure damper as a direct replacement.\u003c\/p\u003e","brand":"Adapt Motorsport","offers":[{"title":"Adjustable REgulator","offer_id":40973580238945,"sku":"AMS9050104","price":265.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0257\/7357\/2193\/files\/20240901_120946-ai-brush-removebg-vbijqtoq.png?v=1725370478"},{"product_id":"porsche-911-3-6-964-993-3-bolt-intake-adapter-stand-kit","title":"Porsche 911 3.6 964 993 3 bolt Intake Manifold Adapter\/Stand Kit","description":"\u003ch2\u003eDescription\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cp\u003eThese adapters are used to replace the broken plastic factory intake stands\/manifold adapters for 964 and 993 engines with the 3 bolt cylinder heads.   They are used to fit the intake manifolds to the cylinder heads. CNC machined our exacting tolerances and finish, and anodised black.  Machined to match the factory intake port diameter, or available in larger 43.5mm inside diameter.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThe adapters come with fuel rail posts, in standard form, these accept all Bosch EV1, 6, 14 long body injectors. The posts are marked for easy cutting to suit the mid and short length EV injectors. This gives ultimate flexibility for injector selection.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eThis design permits the use of the AMS fuel rails, and positions the injector over the same relief in the intake port for the original injector.\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eNow Available, upgrade to our single advanced fuel rail with built in fuel pressure regulator and damper, simplifies number of hoses and fittings required for fuel system installation. Listed price is an upgrade to the adapter and fuel rail kits. Only available in combination with an adapter kit, with fuel rails, not available separately, or with adapter only kits. For a fuel rail kit without adapters, see our other product listings.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eCheck out our complete kits and other parts such as fuel pressure regulator kits to make the perfect upgrade set!\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eKey Features:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePrecision machined from high grade aluminium\u003c\/li\u003e\n\u003cli\u003eO-ring seal to cylinder head\u003c\/li\u003e\n\u003cli\u003eAnodized finish in black\u003c\/li\u003e\n\u003cli\u003eFits all Bosch 14mm O-ring fuel injectors, long, medium and short\u003c\/li\u003e\n\u003cli\u003eFuel rail spacers are marked for easy cutting to suit long, medium or short injector types.\u003c\/li\u003e\n\u003cli\u003eFuel rails and fittings as an optional kit\u003c\/li\u003e\n\u003cli\u003eAn upgrade from the OEM Porsche part 964 110 711 01 (96411071101) and 993 110 712 50 (99311071250) \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eLimited Number, Non Power Steering Versions\u003c\/h2\u003e\n\u003cp\u003eWe have a limited batch of intake adapters that are suitable for cars without the hydraulic power steering pump, such as when installed in G model bodies, or using electric power steering. these versions are stated as \"No PS\" in the product selection. These will not fit 964\/993 with power steering pumps installed.\u003c\/p\u003e\n\u003ch2\u003eWhats Included:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e6 x CNC aluminium adapters\u003c\/li\u003e\n\u003cli\u003e4 x Spacer\/Posts for fuel rail \u003c\/li\u003e\n\u003cli\u003e4 x Bolts to suit standard full length Bosch injectors\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat Is Not Included:\u003c\/h2\u003e\n\u003cp\u003eManifolds, rubber joiners, injectors, hose clamps are not included in the sale, but are available separately.\u003c\/p\u003e\n\u003ch2\u003eModel Fitment\u003c\/h2\u003e\n\u003cp\u003eFor standard 964 engines, the port is 41.5mm.\u003c\/p\u003e\n\u003cp\u003eFor standard 993 engines, the port is 43.5mm for VRAM and Non VRAM\u003c\/p\u003e\n\u003cp\u003eLarger options up to 46mm available to order.\u003c\/p\u003e\n\u003ch2\u003eLead Time:\u003c\/h2\u003e\n\u003cp\u003e41.5mm and 43.5mm Units in Stock. Custom sizes or colours are typically a 5 week lead time. \u003c\/p\u003e\n\u003cp\u003eSign up for our mailing list to keep up to date with this, and other products we are currently developing.  Sign up on our front page here:  \u003ca href=\"https:\/\/adaptmotorsport.com\/\"\u003ehttps:\/\/adaptmotorsport.com\/\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Adapt Motorsport","offers":[{"title":"41.5mm Black Adapter Kit Only","offer_id":41531951153249,"sku":"AMS9050157","price":805.0,"currency_code":"CHF","in_stock":true},{"title":"41.5mm Black Adapter Kit + Fuel Rail Kit","offer_id":41531951186017,"sku":"AMS9050157 + AMS9050033","price":1115.0,"currency_code":"CHF","in_stock":true},{"title":"43.5mm Black Adapter Kit Only","offer_id":41531951218785,"sku":"AMS9050158","price":805.0,"currency_code":"CHF","in_stock":true},{"title":"43.5mm Black Adapter Kit + Fuel Rail Kit","offer_id":41531951251553,"sku":"AMS9050158 + AMS9050033","price":1115.0,"currency_code":"CHF","in_stock":true},{"title":"41.5mm Black Adapter Kit + Fuel Rail Kit No PS","offer_id":57332937032054,"sku":null,"price":1000.0,"currency_code":"CHF","in_stock":true},{"title":"43.5mm Black Adapter Kit + Fuel Rail Kit No PS","offer_id":57332937064822,"sku":null,"price":1000.0,"currency_code":"CHF","in_stock":true},{"title":"Advanced Fuel Rail Upgrade Kit Single","offer_id":57332937097590,"sku":null,"price":260.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0257\/7357\/2193\/files\/20231107_185740-removebg-preview_554b775b-69bf-47f2-b40e-ae4026539a23.png?v=1709652673"},{"product_id":"fuel-pressure-regulator-bosch-ferrari","title":"Fuel Pressure Regulator, Bosch Replacement, Ferrari 348 \u0026 Mondial","description":"\u003cp\u003eA direct replacement for the OEM Bosch fuel pressure regulators used in Ferrari 348 and Mondial models. These are available to suit both the early and later model fuel pressure regulators. Please choose your option.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eOur fuel pressure regulator uses the latest Bosch OEM regulator module to be a direct replacement to the aging and leaking units. This simple and elegant design uses steel O-Ring boss sealing adapters to the manifold with multiple options for hose connections. The units are serviceable by replacing the Bosch regulator module.\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEasy to replace regulator module.\u003c\/li\u003e\n\u003cli\u003e3.0 bar (early) or 3.8 bar (late) pressure rating\u003c\/li\u003e\n\u003cli\u003eBosch OEM reliability\u003c\/li\u003e\n\u003cli\u003eSpare outlet port for fuel pressure sensor\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThere are two versions of this regulator, one has a barb for a hose on the bottom, the other a threaded connection on the bottom. Please check what is installed in your vehicle as there can be some crossover models that have the different versions of the regulator.\u003c\/p\u003e\n\u003cp\u003eNote, On some engines, the Factory installed late 3.8 bar fuel pressure, with the early  barb outlet fitting, please check what is installed in your car, if there is any confusion, please ask us and we can help!\u003c\/p\u003e\n\u003ch2\u003eWhat is Included in the kit:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Fuel pressure regulator body\u003c\/li\u003e\n\u003cli\u003e1 x Bosch regulator module\u003c\/li\u003e\n\u003cli\u003e2 x custom adapter fittings to fit to Porsche OEM hose ends.\u003c\/li\u003e\n\u003cli\u003e2 x ORB Plug\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eOption 1: 3.0 Bar Fuel Pressure Regulator\u003c\/h2\u003e\n\u003ch4\u003eApplications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eDirect replacement for Bosch 0 280 160 731 and Bosch 0280160715\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eDirect replacement for Ferrari 137960\u003c\/li\u003e\n\u003cli\u003eSuits Ferrari 348 TB\/TS Engine Numbers 25013-27843\u003c\/li\u003e\n\u003cli\u003eSuits Ferrari Mondial T Engine Numbers 25013-27843\u003c\/li\u003e\n\u003cli\u003eM14 Feed, 5\/16\" Hose Barb outlet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eOption 2: 3.8 Bar Fuel Pressure Regulator\u003c\/h2\u003e\n\u003ch4\u003eApplications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eDirect replacement for Bosch 0 280 160 738\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eDirect replacement for Ferrari 147281\u003c\/li\u003e\n\u003cli\u003eSuits Ferrari 348 GTB\/GTS\/GTC\/Spider \u0026amp; TB\/TS after engine number 27843\u003c\/li\u003e\n\u003cli\u003eSuits Ferrari Mondial T after engine number 27843\u003c\/li\u003e\n\u003cli\u003eM14 Feed, M16 Outlet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAdditional Notes:\u003c\/h3\u003e\n\u003cp\u003eThe product comes fully assembled and ready to install.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Adapt Motorsport","offers":[{"title":"3.0 Bar Regulator (Early)","offer_id":41694374756449,"sku":"AMS9050168","price":260.0,"currency_code":"CHF","in_stock":true},{"title":"3.8 Bar Regulator (Late)","offer_id":41694374789217,"sku":"AMS9050167","price":260.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0257\/7357\/2193\/files\/Porsche944928924Damper_1df26912-fa77-4e36-8b4a-3debee3ad0f6.png?v=1716828783"},{"product_id":"ignition-cam-sensor-kit-964-993","title":"Ignition \/ Cam Sensor Kit 964\/993","description":"\u003cp\u003eWe are excited to launch our 964\/993 Cam Sensor Kits. \u003c\/p\u003e\n\u003cp\u003eTaking a different approach, the sensor kits measure a trigger disc on the power steering side of the engine. This means that the kit can be easily installed with the engine in the car, with no drilling the camshaft inside the engine risking debris and potential engine damage.\u003c\/p\u003e\n\u003cp\u003eThe kit is available in 2 versions. The CNC sensor holder\/cover are anodised black. The trigger discs are zinc plated yellow.\u003c\/p\u003e\n\u003ch3\u003eVersion 1: Cars with Power Steering\u003c\/h3\u003e\n\u003cp\u003eFor cars that retain the stock 964\/993 power steering pump. This kit uses a sensor holder that fits to the power steering cover. A hole needs to be drilled in the original aluminium belt cover plate for the 964 models, or the plastic belt cover for the 993 models. The trigger disc replaces the washer under the power steering pulley bolt.\u003c\/p\u003e\n\u003cp\u003eThis kit includes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSensor holder bracket\u003c\/li\u003e\n\u003cli\u003eSensor and connector kit\u003c\/li\u003e\n\u003cli\u003eTrigger disc\u003c\/li\u003e\n\u003cli\u003eFasteners and sealing O ring\u003c\/li\u003e\n\u003cli\u003eSpacers for 993 cover\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVersion 2: Cars with Power Steering Removed\u003c\/h3\u003e\n\u003cp\u003eFor cars where the power steering pump is removed, the kit uses a trigger disc bolted to the end of the camshaft and a cover plate that bolts to the factory location that previously held the power steering bracket. The camshaft must retain the power steering drive extension, for some aftermarket camshafts where it is not supplied with this extension, this kit is not suitable.\u003c\/p\u003e\n\u003cp\u003eThis kit includes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCover plate with sensor mount\u003c\/li\u003e\n\u003cli\u003eSensor and connector kit\u003c\/li\u003e\n\u003cli\u003eTrigger disc\u003c\/li\u003e\n\u003cli\u003eFasteners\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eOptional: Distributor Plug Kit\u003c\/h3\u003e\n\u003cp\u003eFor cars where the distributor is removed for coil on plug applications we have a plug kit to block off the remaining hole in the crank case. This plug is suitable for all 6 cylinder 911 engines 2.7, 3.0, 3.2, 3.6.\u003c\/p\u003e\n\u003ch3\u003eNotes:\u003c\/h3\u003e\n\u003cp\u003ePower steering parts not included. Such as pulley, cover plate, bolt, fasteners.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch1\u003e\u003c!----\u003e\u003c\/h1\u003e","brand":"Adapt Motorsport GmbH","offers":[{"title":"Version 1: Cars with power steering","offer_id":41696693846113,"sku":"AMS9050179","price":220.0,"currency_code":"CHF","in_stock":true},{"title":"Version 2: Cars without power steering","offer_id":41696693878881,"sku":"AMS9050180","price":235.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0257\/7357\/2193\/files\/Untitled_2000_x_2000_px_8598bb94-fe09-42f6-913d-8b75b2dca32c.png?v=1717930892"},{"product_id":"porsche-911-3-6-964-993-3-bolt-intake-manifold-adapter-stand-kit-copy","title":"Porsche 911 3.6 964 Dual Injector 993 3 Bolt Intake Manifold Adapter\/Stand Kit","description":"\u003cp\u003eSome like it big! Our high performance intake adapters now have an option for dual injectors. Specifically designed for high power, big injector or dual fuel (pump\/race fuel\/Methanol) systems usually installed on big horsepower turbo setups. two separate fuel rails allow for independent fuel systems, or small and large injector combinations.\u003c\/p\u003e\n\u003cp\u003eThey are used to fit the intake manifolds to the cylinder heads. CNC machined our exacting tolerances and finish, and anodised black.  Machined to match the factory intake port diameters.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e964 standard \u0026amp; RS intake port 41.5mm\u003c\/p\u003e\n\u003cp\u003e993 standard intake port 43.5mm (non VRAM and VRAM)\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eThis design permits the use of the AMS fuel rails, and positions the injector over the same relief in the intake port for the original injector. The intake adapters are 7mm taller than the factory intake adapters.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eCheck out our complete kits and other parts such as fuel pressure regulator kits to make the perfect upgrade set!\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eKey Features:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePrecision machined from high grade aluminium\u003c\/li\u003e\n\u003cli\u003eO-ring seal to cylinder head\u003c\/li\u003e\n\u003cli\u003eAnodized finish in black\u003c\/li\u003e\n\u003cli\u003eFits all Bosch 14mm O-ring fuel injectors, long, medium and short\u003c\/li\u003e\n\u003cli\u003eFuel rail spacers are marked for easy cutting to suit long, medium or short injector types.\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhats Included:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e6 x CNC aluminium adapters\u003c\/li\u003e\n\u003cli\u003e4 x Spacer\/Posts for fuel rails\u003c\/li\u003e\n\u003cli\u003e8 x Bolts to suit standard full length Bosch injectors\u003c\/li\u003e\n\u003cli\u003e4 x AMS machined fuel rails\u003c\/li\u003e\n\u003cli\u003eORB plugs and adapters for AN6 fittings.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat Is Not Included:\u003c\/h2\u003e\n\u003cp\u003eManifolds, rubber joiners, injectors, hose clamps are not included in the sale, but are available separately.\u003c\/p\u003e\n\u003ch2\u003eLead Time:\u003c\/h2\u003e\n\u003cp\u003eProducts are coming soon. If not available in stock, 5 weeks lead time.\u003c\/p\u003e\n\u003cp\u003eSign up for our mailing list to keep up to date with this, and other products we are currently developing.  Sign up on our front page here:  \u003ca href=\"https:\/\/adaptmotorsport.com\/\"\u003ehttps:\/\/adaptmotorsport.com\/\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Adapt Motorsport","offers":[{"title":"41.5mm Black Adapter Kit + Fuel Rail Kit","offer_id":41767180435553,"sku":"AMS9050190+AMS9050033","price":2050.0,"currency_code":"CHF","in_stock":true},{"title":"43.5mm Black Adapter Kit + Fuel Rail Kit","offer_id":41767180501089,"sku":"AMS9050190+AMS9050033","price":2050.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0257\/7357\/2193\/files\/file_33.png?v=1727610312"},{"product_id":"classic-fuel-pressure-regulator-bosch-direct-mount","title":"Classic Fuel Pressure Regulator Bosch Direct Mount","description":"\u003ch1\u003eIn Stock Now! \u003c\/h1\u003e\n\u003cp\u003eDirect replacement for the OEM Bosch fuel pressure regulators on the BMW E30 M3,  and many other makes and models.  Most of these regulators are original and now nearly 40 years old.  They are prone to leaking or failure and can cause all sorts of running and tuning issues.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eUsing a Bosch 3.0 bar fuel pressure regulator, this simple and elegant design is a direct fit to the factory fuel system.\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEasily replaceable fuel pressure regulator.\u003c\/li\u003e\n\u003cli\u003eDirect O-ring fit to factory fuel rail\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e8mm Hose barb return line fitting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe Bosch fuel pressure regulator is limited to 200lph, it is not suitable to run with a Bosch 044 fuel pump as it exceeds the regulator flow capacity.\u003c\/p\u003e\n\u003ch2\u003eWhat is Included in the kit:\u003c\/h2\u003e\n\u003ch3\u003eOEM Fitting Kit - 3.0 Bar Fixed Fuel Pressure Regulator, 8mm Barb outlet\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Fuel pressure regulator body\u003c\/li\u003e\n\u003cli\u003e1 x 3.0 Bar fixed pressure regulator\u003c\/li\u003e\n\u003cli\u003e8mm barb outlet fitting\u003c\/li\u003e\n\u003cli\u003eCap screw fasteners and lock washers.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4 style=\"padding-left: 30px;\"\u003eApplications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eSuits BMW 318i 85-87, M3 \u0026amp; Evo 1 and 2 86-92, 525i 81-87, 528i 81-87, 535i 85-87, 635CSi 78-89, M5 85-87, 728i 77-86, 732i 79-86, 735i 79-82\u003c\/li\u003e\n\u003cli\u003eCitroen BX 82-94\u003c\/li\u003e\n\u003cli\u003ePeugeot 205 83-87, cabrio 86-95, 205 II 87-2000\u003c\/li\u003e\n\u003cli\u003eSuits Volvo 740 Turbo 85-87, 760 Turbo 85-87\u003c\/li\u003e\n\u003cli\u003eReplacement for Bosch 0 280 160 226, 0280160226\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAdditional Notes:\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cp\u003e** Other fittings and options such as fuel pressure sensors, or fuel pressure gauges available upon request.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e** Alternative pressures can be selected, please contact us to discuss the options.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Adapt Motorsport","offers":[{"title":"Default Title","offer_id":41782809231457,"sku":"AMS9050169","price":265.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0257\/7357\/2193\/files\/20240813_140626-removebg-preview_4cd1c6f5-20be-4dc5-a17b-bc36f7c1160d.png?v=1725370934"},{"product_id":"fuel-pressure-regulator-bosch-replacement-ferrari-355-456-512-550","title":"Fuel Pressure Regulator Kit Ferrari 355, 456, 512, 550","description":"\u003cp\u003eA direct replacement for the OEM Bosch fuel pressure regulators used in Ferrari:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e355 Motronic 2.7 and 5.2 \u003c\/li\u003e\n\u003cli\u003e456 and 456 M GT\/GTA  \u003c\/li\u003e\n\u003cli\u003e512 M and TR  \u003c\/li\u003e\n\u003cli\u003e550 Barchetta and Maranello   \u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eOur fuel pressure regulators use the latest Bosch OEM regulator module to be a direct replacement to the aging and leaking units. This simple and elegant design is a direct replacement for the factory regulators. The units are serviceable by replacing the Bosch regulator module providing a solution that will be in service for decades to come.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEasy to replace regulator module.\u003c\/li\u003e\n\u003cli\u003e3.8 bar pressure rating, without engine vacuum\u003c\/li\u003e\n\u003cli\u003eBosch OEM reliability\u003c\/li\u003e\n\u003cli\u003eSpare outlet port for fuel pressure sensor\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePrice is for a pair of regulators.\u003c\/p\u003e\n\u003ch2\u003eWhat is Included in the kit:\u003c\/h2\u003e\n\u003cp\u003e2x Fuel pressure regulator assemblies including:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFuel pressure regulator body\u003c\/li\u003e\n\u003cli\u003eBosch regulator module\u003c\/li\u003e\n\u003cli\u003eReturn Fitting\u003c\/li\u003e\n\u003cli\u003eO rings and fasteners\u003c\/li\u003e\n\u003cli\u003eall pre assembled ready for installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eApplications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eDirect replacement for Bosch 0 280 160 564\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eDirect replacement for Ferrari \u003cspan\u003e167321\u003c\/span\u003eSuits Ferrari 456\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Adapt Motorsport","offers":[{"title":"Default Title","offer_id":57840410591606,"sku":null,"price":520.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0257\/7357\/2193\/files\/Ferrari_355.png?v=1778765385"},{"product_id":"fuel-pressure-regulator-ferrari-f40","title":"Fuel Pressure Regulator Ferrari F40","description":"\u003cp\u003eA direct replacement for the OEM Bosch fuel pressure regulators used in Ferrari F40.\u003c\/p\u003e\n\u003cp\u003eOur fuel pressure regulators use the latest Bosch OEM regulator module to be a direct replacement to the aging and leaking units. This simple and elegant design is a direct replacement for the factory regulators. The units are serviceable by replacing the Bosch regulator module providing a solution that will be in service for decades to come.\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEasy to replace regulator module.\u003c\/li\u003e\n\u003cli\u003e3.0 bar pressure rating, without engine vacuum\u003c\/li\u003e\n\u003cli\u003eBosch OEM reliability\u003c\/li\u003e\n\u003cli\u003eSpare outlet port for fuel pressure sensor\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFuel flow is limited to 200lph for each regulator, 400lph total. For upgraded fuel systems, please contact us for alternative solutions.\u003c\/p\u003e\n\u003cp\u003ePrice is for a pair of regulators.\u003c\/p\u003e\n\u003ch2\u003eWhat is Included in the kit:\u003c\/h2\u003e\n\u003cp\u003e2x Fuel pressure regulator assemblies including:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFuel pressure regulator body\u003c\/li\u003e\n\u003cli\u003eBosch regulator module\u003c\/li\u003e\n\u003cli\u003eReturn Fitting\u003c\/li\u003e\n\u003cli\u003eO rings and fasteners\u003c\/li\u003e\n\u003cli\u003eall pre assembled ready for installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eApplications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eDirect replacement for Weber RP12\/00\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eDirect replacement for Ferrari \u003cspan\u003e134530\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Adapt Motorsport","offers":[{"title":"Default Title","offer_id":57841012506998,"sku":"AMS9050325 x 2","price":520.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0257\/7357\/2193\/files\/Ferrari_F40_regulator.png?v=1778765053"}],"url":"https:\/\/adaptmotorsport.com\/collections\/frontpage.oembed?page=3","provider":"Adapt Motorsport GmbH","version":"1.0","type":"link"}